AUTONET TV

Steering You Right (Tie Rod End Replacement)

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape. 

Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly.

These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they should be replaced when they've reached the end of their life span.

If you notice any of these things happening on your vehicle, bring it in to us so a technician can check it out.  There are a couple of different types of steering, recirculating ball steering and the one most of the latest vehicles have, rack and pinion. When we replace your tie rod ends, we will remove and replace the old ones and adjust them to meet your vehicle manufacturer's specifications.

Tie rod ends should often be replaced in pairs, and your vehicle should be aligned afterwards.  Keep your steering working the way it's supposed to, and your vehicle will be sure to steer you right.

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net

The Light Nobody Wants to See (Check Engine Light)

You've probably had your Check Engine Light go on.  Then it goes off and you figure, hey, whatever the problem was, it's gone now and I don't have to worry about it.  Well, the problem may have gone away and it may not have.

Your vehicle likely has one of these warning lights on the instrument panel: an amber light that looks like an engine or reads "Check Engine" or "Service Vehicle Soon."  If that light comes on and stays on, it usually means there's something amiss but not urgently in need of service.  (Now if it's blinking, that's another story that we'll deal with in a minute.)

Sometimes when it comes on and stays steadily lit, the problem will go away and the light will go out.  Sometimes it will stay on until you get the problem fixed.  Either way, the engine's computer will store a code that can provide clues to what's not working—or wasn't working—the way it's supposed to.

If you are just dying to know what that code is, you can buy a little code reader or take your vehicle to an auto parts store and they'll read it.  Problem is, the code offers so many options that unless you are a trained technician, you probably won't have a clue what those codes mean. 

So if you want to be sure, take it to your vehicle repair facility and have them check it.  Technicians are trained to decipher the codes and, using their experience and other diagnostic equipment, can get to the root of the problem and fix it. 

As we mentioned before, if that Check Engine light comes on and is blinking, it means a more serious engine malfunction that can damage expensive components such as the catalytic converter and even the engine itself.  It's important to have that checked by a professional as soon as possible. 

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net

What's up with Diesels in Fenton?

Would you be surprised to learn that about half of the passenger cars in Europe have diesel engines? You might also be surprised to learn that most manufacturers produce a variety of diesel-fueled cars for purchase abroad.

Diesel-fueled vehicles haven't been as popular in the North American markets like MI. But that won't be true for long. North Americans are seeing a lot more diesel-fueled vehicles on the road. And we're not talking about buses and trucks. These vehicles will be passenger cars, pick-ups and SUV's.

There are two reasons for this. The first is a recent change in environmental laws that have upgraded emissions standards for diesel fuel in North America. Diesel fuel in North America used to have higher sulfur content than European fuel, meaning that it was a dirtier fuel to burn. That was okay for larger vehicles, but the lighter-weight engines in passenger vehicles just couldn't tolerate it.

But that high sulfur content is now a thing of the past. Fuel producers are now required to sell cleaner diesel fuel in Fenton. That opens the North American market to more diesel-powered vehicles. The second reason we're going to see more of these vehicles in Fenton is that they're more fuel-efficient than their gasoline-powered counterparts. Diesel fuel has higher energy density than gasoline. That translates to more power per barrel of fuel. In your tank, that translates to better engine performance and about 20% better fuel economy.

People in Fenton may associate diesel engines with black smoke, noise and a definite “shake, rattle and roll.” That's also a thing of the past. Modern diesel engines are smooth, quiet and produce cleaner emissions than gasoline engines. Also, forget that three-second wait behind a diesel vehicle at a stoplight. Modern diesels are just as quick to accelerate as other vehicles on Fenton roads.

Diesel engines have other advantages over gasoline engines. Diesel engines are heavier than gasoline engines because they require more heavy-duty parts, but that means the engines are more durable and can last longer than gasoline engines. Also, diesel engines may be the engines of the future since they can burn many of the new bio-fuels.

Bio-diesel can be manufactured from vegetable oils, including used cooking oil from Fenton restaurants. Just think, one day you could fuel your vehicle on stuff that was once considered waste—one step closer to a cleaner environment here in MI. And if you think hybrid cars are environmentally sound, consider what a diesel-electric hybrid could mean. 

Fenton drivers who are considering buying a diesel-fueled vehicle should know that  preventive maintenance and inspection schedules are different for a diesel engine than a gasoline engine. Diesel fuel is harder on emissions systems than gasoline, so the filters and other devices have to be changed and checked more often. Also, the fuel injection system operates at much higher pressures for diesel than for gasoline, so keeping it clean becomes a higher priority.

When you switch from a gas vehicle to a diesel, you'll have to learn some new rules of vehicle care. But you won't be alone. Most Fenton service centers are aware that diesels are coming to North America and are already prepared to provide service for diesel engines. At Muffler & Go, we are well-versed in diesel technology. You can rely on our team of automotive professionals to provide quality service for diesel-powered vehicles.

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net

Alleviate the Creaks and Squeaks (Chassis Lubrication)

If your vehicle creaks and squeaks when you drive down the road, it may mean that some of the metal parts are rubbing against each other and need to be lubricated.  Those could be parts of the suspension, steering system and the drivetrain. 

Years ago, most vehicles had to have their chassis (what you think of as the frame) regularly lubricated.  Newer vehicles are made with what some call "lifetime lubrication," but there are still parts of the chassis that need to be maintained with lubricants.  Your service advisor can help you know when that needs to be done.

In your owner's manual, the vehicle's manufacturer lists components that need regular maintenance. Things like u-joints, steering joints, sway bars, bushings and joints in the suspension. Some of them may have that "lifetime lubrication," while others may not. When you bring your vehicle in for service, a technician will look for any parts that have grease fittings.  They will inspect these components, clean the fittings so dirt and other contaminants won't be forced into the part and then lubricate them with a lubricant that meets the manufacturer's specifications. 

Sometimes a chassis lubrication is done at the same time as an oil change.  That's also an ideal time for the technician to check other parts of your vehicle that may need attention.  That could include greasing other parts such as the fuel door, trunk and door hinges, suspension springs and door latches.

Times have changed since the days when a "lube" job was synonymous with an oil change. Depend on your owner's manual and advice from your service advisor to know when "grease" is the word—and appropriate for your vehicle.

Muffler & Go
1478 N Leroy St
Fenton, MI 48430
(810) 629-1066
http://www.mufflerandgo.net